94
4.SETTING ITEMS (ADMIN)
2.SETTING GENERAL FUNCTIONS (Cont.)
4
4
Enter the current administrator password and press the [ENTER] but-
ton.
• The input password appears as asterisks (*).
If the administrator password will be changed at the first time, enter “123456” in the “Old Password” field.
5
Same as “OLD PASSWORD”, press the [NEW PASSWORD] and
[RETYPE NEW PASSWORD] buttons and enter the new password.
• You can enter alphanumeric characters of 6 or more and 10 or less for the administrator’s password. You can-
not enter any symbol characters.
You cannot leave these fields blank to set no administrator password. You must set the administrator password.
6
Press the [ENTER] button at the bottom of the touch panel.
To Next Page
Loading...
