Toshiba e-Studio 202S - BEFORE INSTALLATION; Hardware and software requirements

e-STUDIO202S EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 5
5. Sensors and switches
1
2
3
4
5
6
No. Name Signal Type Function Output
1 Scanner unit home
position sensor
MHPS Transmission sensor Scanner unit home position
detection
"H" at home position
2 POD sensor POD Transmission sensor Paper exit detection "H" at paper pass
3 PPD2 sensor PPD2 Transmission sensor Paper transport detection 2 "L" at paper pass
4 Cassette detection switch CED1 Micro-switch Cassette installation detection "H" at cassette insertion
5 PPD1 sensor PPD1 Transmission sensor Paper transport detection 1 "L" at paper pass
6 Door switch DSW Micro-switch Door open/close detection
(safety switch for 24V)
1 or 0V of 24V at door open