1 TROUBLESHOOTING FOR THE HARDWARE
22 Clearing a Paper Misfeed
3
Lower the green lever carefully and then close the automatic duplexing unit cover.
Paper misfeed on the paper transport path
Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or automatic
duplexing unit cover.
This could injure you.
3
Close the automatic duplexing unit cover.
2
While holding the green lever, remove the misfed
paper.
2
1
1
Open the automatic duplexing unit cover on the right.
2
Remove the misfed paper.
Be sure not to touch the transfer belt when removing the misfed
paper. This could stain copy images.
Do not clean roller [A] though it may be stained. It will be
automatically cleaned at the next printing.
To Next Page
Loading...
