1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 51
Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and saddle stitch
unit run out.
P.51 “Refilling finisher staples”
P.54 “Refilling Saddle Stitch unit staples”
Refilling finisher staples
Inner Finisher
1
Lift up the control panel and then open the front cover
of the finisher.
2
While holding the green lever, move the finisher to the
left until it stops.
3
Open the Hole Punch Unit while pushing the green
lever.
4
Remove the staple cartridge.
2
1
2
1
To Next Page
Loading...
