1 TROUBLESHOOTING FOR THE HARDWARE
36 Clearing a Paper Misfeed
4
Clear the paper misfeed following the guidance shown on the touch panel. Then close
all the drawers and covers.
Printing resumes.
3
Check that the guide width is correct and there is no
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides. In particular, be sure that
the upper limit for thick paper is not exceeded when placing thick
paper in the first drawer. The amount of thick paper you can load in
the drawer is lower than that for plain paper.
To Next Page
Loading...
