1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 53
1 TROUBLESHOOTING FOR THE HARDWARE
Saddle Stitch Finisher
10
Close the front cover of the finisher.
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
4
Fit the new staple case into the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.
To Next Page
Loading...
