1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 43
TROUBLESHOOTING FOR THE HARDWARE
Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by pressing the right side of the lever.
Saddle Stitch Finisher and Hole Punch Unit
1
Raise the lever and open the upper receiving tray of the finisher.
2
Open the cover of the Hole Punch Unit when it is installed.
3
Open the front cover of the finisher.
To Next Page
Loading...
Need help?
General
