1 BEFORE USING EQUIPMENT
22 Placing Paper
Registering paper size
When you place paper for the first time or you replace the paper with that of a different size, you need to
register the size to this equipment.
2
Press the [USER] tab on the touch panel to display the user setting menu, and then
press [DRAWER].
3
Select the paper size on the touch panel.
1) Select the drawer in which you placed paper.
2) Select the paper size.
3) Press [OK].
To automatically detect the size of paper placed in a drawer:
Select [AUTO (mm)] when A/B format paper is placed and [AUTO (inch)] when LT format paper is
placed instead of selecting a specified paper size. The paper size is automatically registered to the
equipment with the automatic paper size detection function when paper is placed in this drawer.
When paper size is set to be detected automatically:
When [AUTO (mm)] or [AUTO (inch)] has been selected for the paper size, the following procedure is not
required. The paper size is set automatically.
1
Press the [USER FUNCTIONS] button on the control
panel.
To Next Page
Loading...
Need help?
General
