Accessing TopAccess End-User Mode 15
Accessing TopAccess End-User Mode
To operate TopAccess, this equipment should be connected to the network and be configured
with the TCP/IP settings. After you complete the TCP/IP setup, you can access to TopAccess
web site to operate various functions from your computer using a web browser such as Firefox
and Internet Explorer.
You can use the TopAccess web-based utility from a Windows, Macintosh or UNIX operating
system environment. The following browsers are
supported:
Windows
y Internet Explorer 5.5 Service Pack 2 or later
(Internet Explorer 7.0 or later when IPv6 is used)
y Firefox 1.5.0.4 or later
Macintosh
y Safari 2.0 or later
y Firefox 1.5.0.4 or later
UNIX
y Firefox 1.5.0.4 or later
Accessing TopAccess in end-user mode
You can access the web utility TopAccess by your entering its URL on the address box of web
browser. To access it under a Windows Vista environment, confirm the network connection sta-
tus on the Network Map with the LLTD (= Link Layer Topology Discovery) feature of Windows
Vista, and then click the displayed icon of this equipment.
y P.16 “Accessing TopAccess by entering URL”
y P.17 “Accessing TopAccess from Network Map (Windows Vista)”
To Next Page
Loading...
