MANAGING DEPARMENT CODE 69
Resetting the Counter of Each Department
The function allows you to reset the counter of specific department code only.
1
In the DEPT. MANAGEMENT menu, press the [DEPARTMENT REG-
ISTRATION] button.
y The DEPARTMENT CODE screen is displayed.
For the procedure to display the screen above, see "Logging On As Administrator".
P. 53
2
Press the department button that you want to reset the counter and
press the [RESET COUNTERS] button.
y The clear confirmation screen is displayed.
If the touch panel does not display the department code that you want to clear the
counter, press the [Next] button to display the next screen.
To Next Page
Loading...
Need help?
General
