e-STUDIO2500c/3500c/3510c
(b) Enter adjustment mode [05]. Increase the values for codes [532/534] to adjust the background peak of
range correction and lighten the copy image.
(Increase the number of pixels to be identified as "white" by range correction.)
• The code to use varies according to the original mode (Text/Photo or Text). Adjust the value for [05]
code corresponding to the original mode for which you would like to improve the image quality and
increase the current value by 10 to 30.
Original mode [05] code Recommended value
Acceptable
value range
Default
Text/Photo 05-532 Current value + 10 or more 40
Text 05-534 Current value + 10 or more
0 to 255
40
Precautions after the completion of the adjustment
The adjustment may possibly cause text handwritten with a pencil or light text to become illegible on the copy.
Therefore, carefully perform the adjustment, while checking the copy image.
Remarks
Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a loss in
MFP performance, including degradation in the image quality.
2. Copier-specific Adjustments
2.6
To Next Page
Loading...
