Toshiba E-STUDIO 3500C - Current Value; Current Value 2

e-STUDIO2500c/3500c/3510c
(4) Adjust the background peak of range correction to lighten the copy image.
• Use steps (a) to (b) to adjust the background peak of range correction.
(a) Enter adjustment mode [05]. Change the values for codes [570/572] or [693/695] to set the background
peak of range correction to "fixed."
• The code to use varies according to the density option (auto or manual), original mode, (Text/Photo or
Text) and use of the RADF (MR-3018). Adjust the value for [05] code corresponding to the condition
for which you would like to improve the image quality and set "1" in the one’s or the ten’s place.
* Set value (Ex.: To set the background/text peak in the manual and auto copy density mode to "fixed")
Value Background peak Text peak
1 Fixed Fixed
2 Varied Fixed
3 Fixed Varied
4 Varie d Var i e d
To scan an original placed manually on the original glass
Recommended value Default Original
mode
[05] code
Copy density
mode
Ten’s place One’s place Ten’s place One’s place
Manual 1 Current value
Text/Photo 05-570
Auto
Current value 1
2 2
Manual 1 Current value
Text 05-572
Auto
Current value 1
2 2
To scan an original fed from the RADF
Recommended value Default Original
mode
[05] code
Copy density
mode
Ten’s place One’s place Ten’s place One’s place
Manual 1 Current value
Text/Photo 05-693
Auto
Current value 1
2 2
Manual 1 Current value
Text 05-695
Auto
Current value 1
2 2
Ten’s place: Set the background/text peak in manual copy density mode to "fixed" — See the
table below for further information.
One’s place: Set the background/text peak in auto copy density mode to "fixed" — See the table
below for further information.
1 1
2. Copier-specific Adjustments
2.7