e-STUDIO2500c/3500c/3510c
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Press the [BASIC] button on the Control Panel. Select "PHOTO" from among the original mode options.
* To have "PHOTO" selected from among the original mode options by default, refer to procedure (1) in 2.8
To Eliminate Moiré.
After selecting the Photo mode, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(2) Press the [BASIC] button on the Control Panel. Select "IMAGE SMOOTHING" from among the original
mode options.
* To have "IMAGE SMOOTHING" selected from among the original mode options by default, refer to
procedure (1) in 2.8 To Eliminate Moiré.
Precautions after the completion of the adjustment
Nothing in particular.
Remarks
When "PHOTO" or "IMAGE SMOOTHING" is selected from among the original mode options, image processing
is performed to give a higher priority to the accurate reproducibility of halftones. As a result, the copying speed
will be slowed down, compared to other modes.
2. Copier-specific Adjustments
2.14
To Next Page
Loading...
