2
3
1
4
5
37
In this case
If you make a mistake when dialing the Fax
number
Press the [CLEAR] button on the control panel to delete
all the Fax numbers you entered. Or press [BACK SPACE]
on the touch panel to delete them one by one. Refer to
“Chapter 2 SENDING/RECEIVING A FAX” in the GD-1250/
GD-1260/GD-1270 Operator's Manual for FAX Unit for
details.
To delete all the Fax numbers specied in the address book
Press [ALL CLEAR] on the touch panel.
To specify Fax numbers which have previously been registered to a group
Press the [GROUP] tab on the touch panel and then the Fax group to send originals. Refer to “Chapter 2
SENDING/RECEIVING A FAX” in the GD-1250/GD-1260/GD-1270 Operator's Manual for FAX Unit for details.
To search by address
Press [SEARCH] on the touch panel. Refer to “Chapter 2 SENDING/RECEIVING A FAX” in the GD-1250/
GD-1260/GD-1270 Operator's Manual for FAX Unit for details.
To set the transmission conditions
To set the transmission conditions, such as Resolution and Image density, press [OPTION] on the touch
panel. Refer to “Chapter 2 SENDING/RECEIVING A FAX” in the GD-1250/GD-1260/GD-1270 Operator's
Manual for FAX Unit for details.
To set advanced functions
To set advanced functions, such as Mailbox communication and Recovery transmission, press the
[ADVANCED] tab. Refer to “Chapter 4 ADVANCED FUNCTIONS” in the GD-1250/GD-1260/GD-1270
Operator's Manual for FAX Unit for details.
Basic Fax Operation
To Next Page
Loading...
