Toshiba e-STUDIO 3530c - Page 52

Chapter 3 REPLACEMENT OF SUPPLIES
50
1
2
1
Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
1
2
2
Pull the handle of the stapler toward you, and
then turn it clockwise.
3
Take out two empty staple cartridges.
4
Install two new staple cartridges.
1
2
5
Pull the handle of the stapler toward you, and
then lower the stapler to its original position.
1
2
6
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.
Saddle stitch unit