5 IMAGE ADJUSTMENT
170 Using Image Adjustment Functions
5
Press or of the color to obtain the desired color balance.
After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step.
6
Press or of the color on each density area to obtain the desired color balance.
For example, when you adjust the high density area of magenta (M) to the side, the magenta in its
high density area becomes darker.
After completing the adjustment, press [OK].
Canceling color balance adjustment
y Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].
y If you want to cancel the adjustment of all colors, press [RESET], and then [OK].
To Next Page
Loading...
Need help?
General
