Toshiba E-STUDIO 5528A - Copying Stops During Scanning of the Originals. Not Enough Work Space to Store Originals. will You Print out Stored Originals? Is Displayed; A Copied Image Is too Light; A Copied Image Is too Dark

2.QUESTIONS FOR COPYING
Questions for Copying 19
QUESTIONS FOR COPYING
 Copying stops during scanning of the originals. “Not enough Work Space to store
originals. Will you print out stored originals?” is displayed.
Copying stops when no available space has remained in the internal memory. To copy the scanned images, press
[Yes]. To cancel, press [No].
 A copied image is too light.
This may occur due to the following causes. Check them and take the appropriate actions.
 A copied image is too dark.
The copy density will be set too dark. Lighten the density manually. Alternatively, try the automatic density mode.
No toner is left. When no toner is left, “Install new *** toner cartridge” is
displayed. Replace the toner cartridge indicated by “***” with a
new one of the same color. For details, see the reference below:
Troubleshooting - TROUBLESHOOTING FOR THE HARDWARE -
Replacing a Toner Cartridge
The copy density is set too light. Darken the density manually. Alternatively, try the automatic
density mode.