2 HOW TO MAKE COPIES
26 Placing Originals
3
Lower the RADF carefully.
Book-type originals
You can place book-type originals on the original glass.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the RADF.
3
Lower the RADF carefully.
y Do not lower the RADF forcibly when the original is very thick. There will be no problem in copying even if it
is not fully lowered.
y Do not look directly at the original glass because intensive light may escape during copying.
When you copy highly transparent originals
When you copy highly transparent originals such as OHP films or
tracing paper, place a blank sheet, which is the same size as the
original or larger, over the original.
2
Open the desired page of the original and place it with
its face down. Align it with the left rear corner of the
original glass.
When you make 2-sided copies from book-type originals in modes
such as book-type original to 2-sided copying or dual page copying,
align the center of the original on the yellow indicator line of the original
glass.
P.80 “Making a 2-sided copy from a book-type original”
P.95 “Dual Page”
To Next Page
Loading...
