7 TopAccess Administrator Mode
114 Accessing TopAccess Administrator Mode
Accessing TopAccess Administrator Mode
TopAccess, web-based utility available on this equipment, allows you to manage this equipment
remotely via the Internet or via your company’s intranet.
To operate TopAccess, this equipment should be connected to the network and configured with
the TCP/IP settings. After you complete the TCP/IP setup, you can access to the TopAccess
web site to operate various functions from your computer using a Web browser such as
Netscape Navigator and Internet Explorer.
You can use the TopAccess web-based utility from a Windows, Macintosh or Unix operating sys-
tem environment. The following browsers are supported:
Windows
y Internet Explorer 5.5 or later
y Netscape Navigator 7.1 or later
Macintosh
y Safari 2.0
y Netscape Navigator 7.1 or later
Unix
y Netscape Navigator 7.1 or later
Accessing TopAccess in the administrator mode
1
To navigate to TopAccess, enter the following URL on the address
box of your Internet browser.
http://<IP Address> or http://<Device Name>
For example
When the IP address of the equipment is “10.10.70.105”:
http://10.10.70.105
When the device name of this equipment is “mfp-00c67861”:
http://mfp-00c67861
When SSL for the HTTP network service is enabled, the alert message may appear
when you enter the URL in the address box. In that case, please click [Yes] to proceed
the operation.
2
The TopAccess web page opens.
To Next Page
Loading...
