7 TopAccess Administrator Mode
120 Setting up from TopAccess
2) Auto Power Save
Select how long this equipment can remain inactive before entering the power save mode.
3) Sleep/Auto Shut Off
Select how long this equipment can remain inactive before entering the sleep mode or auto
shut off mode.
Setting up the Time and Date
You can set the date, time, time zone, and date format. You can also enable the daylight mode.
1) Date/Time
To adjust the date, select year in the first field, select month in the second field, and enter
date in the third field.
To adjust the time, enter hour in the fourth field, and enter time in the fifth field.
2) Time Zone
Select the time zone where this equipment is located.
3) Date Format
Select the date format.
4) Daylight Mode
Select “ON” to set the daylight saving time system.
Setting up the Web General Setting
You can set the displayed language of TopAccess, and session timer to automatically log out
from the administrator mode.
1) WEB Language
Select the displayed language of TopAccess.
2) Session Timer
Enter how long you want this equipment to preserve the session data of TopAccess. You
can enter any integer between 5 to 999. This setting also applies to the session data of e-Fil-
ing web utility.
1
2
3
4
1
2
To Next Page
Loading...
