7 TopAccess Administrator Mode
168 Setting up from TopAccess
3
In the Save as file submenu page, set the Save as file settings as
required.
y In the Save as file submenu page, you can set the following:
P.169 “Setting up the Local Storage Path”
P.169 “Setting up the Storage Maintenance”
P.169 “Setting up the Destination”
P.170 “Setting up the Remote 1 and Remote 2”
P.171 “Setting up the N/W-Fax Destination”
P.172 “Setting up the N/W-Fax Folder”
4
Click [Save].
y The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the Save as file submenu then the
page displays the current settings in each field.
To Next Page
Loading...
