Toshiba e-STUDIO166 - Page 216

e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
FUSER / EXIT UNIT
13 - 12
[C] Exit roller
(1) Take off the fuser roller unit.
" P.13-11 "[B] Pressure roller unit / Fuser
roller unit"
(2) Release the latch and take off the gear-A.
Fig. 13-9
(3) Take off the gear-B.
Fig. 13-10
(4) Remove the bracket.
Fig. 13-11
Gear-A
Gear-B
Bracket