1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 63
TROUBLESHOOTING FOR THE HARDWARE
8
Set the paper size again and press [OK].
For details about how to set the paper size, refer to “Doing Paper Settings” in Chapter 1 of the Paper Preparation
Guide.
9
Press the [HOME] button to return to the basic menu. Then press [Copy] to enter the copy menu.
10
Confirm that the paper size is correctly detected if you selected [Auto (mm)] or [Auto (inch)] in
step 8.
The detected paper size is indicated on the drawer button in the equipment status indication area on the left.
An incorrect paper size or “ ” indicates an unsuccessful detection. In this case, see the following page.
P.9 “When This Screen Is Displayed”
11
Try copying or printing again.
Misfeed when making copies or prints (using the bypass tray)
1
Clear the paper misfeed following the guidance shown on the touch panel. Then close all the
covers.
To Next Page
Loading...
