Toshiba E-studio2040c User Manual

3
Replacing Staple Cartridge
43
1
2
3
2
1
Push the lever to separate the Hanging Finisher
from the equipment, and then open the cover.
1
2
2
3
4
2
Take o the staple cartridge, and then take the
empty staple case out of the staple cartridge.
3
Install a new staple case into the staple cartridge.
1
2
4
Press down the transparent cover and pull out the
seal.
5
Install the staple cartridge.
1
2
2
6
Close the Finisher cover, and then install the
Hanging Finisher to the equipment.
Stapler Unit of Hanging Finisher (MJ-1031)
Be careful not to catch your ngers between the equipment and the Finisher (optional).
This could injure you.

Toshiba E-studio2040c Specifications

General

Brand	Toshiba
Model	E-studio2040c
Category	All in One Printer
Language	English