Chapter 5 INFORMATION ABOUT EQUIPMENT
74
Saddle Stitch Finisher (MJ-1106)
Model name MJ-1106
Type Floor type (Console type)
Acceptable paper size
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450 mm, 320 mm x 460 mm, 330
mm x 483 mm, LD, LG, LT, LT-R, ST-R, COMP, 8.5"SQ, 13"LG, 12" x 18", 13" x 19", 8K, 16K, 16K-R
Acceptable paper
weight
64 - 280 g/m
2
(17 lb. Bond - 150 lb. Index)
Number of copies
stapled at a time
(including 2 covers (64 -
256 g/m
2
, 17 lb. Bond to
140 lb. Index)
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A4, B5, LT, 8.5"SQ, 16K 50 sheets 50 sheets 30 sheets
A3, A4-R, B4, FOLIO, LD, LG, LT-R, COMP, 13"LG, 8K 30 sheets 30 sheets 15 sheets
Stapling position Front, Rear, Double
Number of copies saddle
stitched at a time
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A3, B4, A4-R, LD, LG, LT-R, 8K 15 sheets 15 sheets 10 sheets
Number of copies
center-folded at a time
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A3, B4, A4-R, LD, LG, LT-R, 8K 5 sheets 5 sheets 5 sheets
Power source Supplied from the equipment
Dimensions 617 mm (24.29") (W) x 603 mm (23.74") (D) x 1085 mm (42.72") (H)
Weight Approx. 70 kg (154.3 lb.)
Power consumption 100 W max.
Tray loading capacity of Finisher
Upper Tray
With mixed paper not loaded
Mode Non-Sort
A4, A5-R, B5, LT, ST-R, 8.5"SQ, 16K
36.75 mm
(250)
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450
mm, 320 mm x 460 mm, LD, LG, LT-R, COMP, 13"LG, 12"x18",
8K, 16K-R
18.4 mm
(125)
Lower Tray
With mixed paper not loaded
Mode Non-sort Sort/Group Front/Rear Single Position Stapling Two Positions Stapling
A4, B5, LT, 8.5"SQ, 16K
350 mm
(3000)
350 mm
(3000)
Whichever of 100 copies or 2000
sheets is reached rst
Whichever of 150 copies or 2000
sheets is reached rst
A3, A4-R, B4, FOLIO, 305
mm x 457 mm, LD, LG,
LT-R, COMP, 13"LG, 12" x 18",
8K
175 mm
(1500)
175 mm
(1500)
Whichever of 50 copies or 1000
sheets is reached rst
Whichever of 75 copies or 1000
sheets is reached rst
When mixed-size paper is loaded, the tray loading capacity should follow the specications for larger paper sizes in the above tables.
For the loading capacity of the saddle stitch tray, refer to the following guide:
& Copying Guide (PDF): “Chapter 3: BASIC COPY MODES” - “Selecting Finishing Mode”
•
•
Unit: mm (with allowable error of ±7 mm or 0.28")
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)
Unit: mm (with allowable error of ±7 mm or 0.28")
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)