5
Specications of Options
75
Hanging Finisher (MJ-1031)
Model name MJ-1031
Type Hanging-type
Acceptable paper size
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm
*1
, 320 mm x 450 mm
*2
, 320 mm x 460 mm
*2
,
LD, LG, LT, LT-R, ST-R, COMP, 8.5"SQ, 13"LG, 12" x 18"
*1
, 8K, 16K, 16K-R
Acceptable paper
weight
64 - 280 g/m
2
, 17 lb. Bond - 150 lb. Index
Number of copies
stapled at a time
(Including 2 covers (64 -
256 g/m
2
, 17 lb. Bond to
140 lb. Index))
Paper size
80 g/m
2
20 lb. Bond
90 g/m
2
24 lb. Bond
105 g/m
2
28 lb. Bond
A4, B5, LT 50 sheets 26 sheets 24 sheets
A3, A4-R, B4, FOLIO, LD, LG, LT-R, COMP 30 sheets 15 sheets 15 sheets
Stapling position Rear
Power source Supplied from the equipment
Dimensions 411 mm (16.18") (W) x 594.2 mm (23.39") (D) x 382.4 mm (15.06") (H)
Weight Approx. 12 kg (26.5 lb.)
Power consumption 50 W max.
*1 If THICK3 or thicker paper is used, remove one sheet after another from the receiving tray when it is exiting, since it may fall o the tray.
*2 When paper is exiting, remove one sheet after another from the receiving tray, since it may fall o the tray.
Tray loading capacity of Hanging Finisher (MJ-1031)
(MJ-1031 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
A4, A5-R, B5, LT, ST-R, 8.5"SQ
130 mm, 5.12"
(1000)
130 mm, 5.12"
(1000)
Whichever of 130 mm (5.12"), 1000 sheets
or 30 copies is reached rst
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm,
LD, LG, LT-R, COMP, 13"LG, 12" x 18"
65 mm, 2.56"
(500)
65 mm, 2.56"
(500)
Whichever of 65 mm (2.56"), 500 sheets or
30 copies is reached rst
• Sort/Group/Staple is not available with A5-R, B5-R, ST-R.
• If copied paper remains on the receiving tray at the time of the next copying job, the loading capacity is the same as that for mixed-size paper.
(MJ-1031 with mixed paper loaded)
Mode Non-Sort Sort/Group Staples loaded
FOLIO and A4-R
65 mm, 2.56"
(500)
65 mm, 2.56"
(500)
Whichever of 65 mm (2.56"), 500 sheets or
30 copies is reached rst
A3 and A4
B4 and B5
LD and LT
LG and LT-R
Unit: mm (with allowable error of ±4 mm or 0.158")
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)
Unit: mm (with allowable error of ±4 mm or 0.158")
Values in parentheses: Number of sheets (80 g/m
2
or 20 lb. Bond)