1
2
3
4
5
User management
Users of the equipment can be limited and the available functions and past record of each user can be controlled by
using the user management function. When the equipment is managed under this function, turn the power of the
equipment ON and enter the information required (e.g. user name, password) to use the equipment. The menu for
entering user information also appears when you press the [ACCESS] button on the control panel or automatic function
clear has worked. Enter the information according to the procedure below.
When Department or User Management is Used
MFP local authentication, LDAP authentication
Windows Domain Authentication
Tip
If guest user is enabled in the user management, the [GUEST] button is displayed on the touch panel. Press [GUEST] to login as a guest
user. For the types of functions available, consult the administrator.
27
To Next Page
Loading...
Need help?
General
