Toshiba e-studio2330c User Manual

5
2
1
3
4
Specications of Equipment
67
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C Specications
Model name FC-2330C/FC-2820C/FC-2830C/FC-3520C/FC-3530C/FC-4520C
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Belt fusing
Photosensor type OPC
Original scanning system
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution
Scanning 600 dpi x 600 dpi
Writing
Black
-and-white: 2400 dpi x 600 dpi (Smoothing process),1 bit
Color, Image smoothing: 600 dpi x 600 dpi, 8 bits
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3 or LD
Acceptable copy
paper size
Drawer
A3, A
4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13”LG, 8.5”SQ, 8K, 16K,
16K-R
Bypass
P
aper size within 100 - 320 mm (5 1/2” - 12.6”) (Length), 148 - 460 mm (8 1/2” - 18.1”) (Width)
(For printing functions, within 461 mm - 1200 mm (18.15” - 47.24”) (width))
Acceptable copy
paper weight
Drawer 6
4 - 256 g/m
2
(17 - 80 lb. Cover (140 lb. Index))
Bypass 6
4 - 280 g/m
2
(17 - 100 lb. Cover (150 lb. Index))
Warm-up time
e
-STUDIO2330C/2820C/2830C/3520C/3530C: Approx. 99 seconds (AC 100 V, 115 V),
Approx. 89 seconds (AC 220 - 240 V)
e-STUDIO4520C: Approx. 160 seconds
First copy time
(A4 or LT
portrait)
Black-and-white
e-STUDIO2330C/2820C/2830C/3520C: Approx. 6.5 seconds
e
-STUDIO3530C/4520C: Approx. 5.2 seconds
Color
e
-STUDIO2330C/2820C/2830C/3520C/3530C: Approx. 8.4 seconds
e-STUDIO4520C: Approx. 6.8 seconds
Continuous copy speed Refer to the Copying Guide.
Multiple copying Up to 999 copies (digital key entry)
Excluded image
width
Black-and-white
L
eading edge: 3.0±2.0 mm (0.12”±0.08”), Trailing edge: 3.0±2.0 mm (0.12”±0.08”),
Both edge: 2.0±2.0 mm (0.08”±0.08”)
Color
L
eading edge: 5.0±2.0 mm (0.20”±0.08”), Trailing edge: 3.0±2.0 mm (0.12”±0.08”),
Both edge: 2.0±2.0 mm (0.08”±0.08”)
Printer (Black-
and-white/Color)
L
eading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17” +0.11” -0.05”),
Trailing edge: 4.2 mm +1.2 mm -2.8 mm (0.17” +0.05” -0.11”),
Both edge: 4.2±2.0 mm (0.08”±0.08”)
Reproduction
ratio
Actual size 1
00±0.5 %
Zoom
25 -
400 % (in 1 % increments)
For the Reversing Automatic Document Feeder 25 - 200 % (in 1 % increments)
Paper supply
Drawer Approx. 550 sheets (80 g/m
2
, 20 lb. Bond), Approx. 500 sheets (105 g/m
2
, 28 lb. Bond)
Bypass A
pprox. 100 sheets (80 g/m
2
, 20 lb. Bond), Approx. 80 sheets (105 g/m
2
, 28 lb. Bond)
Receiving tray loading capacity Approx. 550 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control A
utomatic plus manual selection from 11 exposure step
USB interface USB 2.0 (Hi-Speed)
Environment (for normal use) T
emperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85 % (No Condensation)
Power requirements and Power
consumption
(including optional equipments)
A
C 220-240 V±10%, 8 A (50/60 Hz): 2.0 kW or less
A
C 115 V±10%, 12 A (50/60 Hz): 1.5 kW or less
A
C 127 V±10%, 12 A (50/60 Hz): 1.6 kW or less (for Saudi Arabia 100 V version only)
Dimensions (equipment only) 699 mm (27.5”) (
W) x 742 mm (29.2”) (D) x 759 mm (29.9”) (H)
Weight A
pprox. 121 kg (267 lb.) (equipment including developer and drum)
Space occupied (equipment only) 11
00 mm (43.3”) (W) x 855 mm (33.7”) (D)
Storage capacity M
ax. 1000 sheets or until the memory is full (Toshiba’s own chart)
• This specication varies depending on the printing conditions and the environment.
• Specications and appearance are subject to change without notice in the interest of product improvement.

Toshiba e-studio2330c Specifications

General

Brand	Toshiba
Model	e-studio2330c
Category	All in One Printer
Language	English