Toshiba E-STUDIO2505AC - User Defaults, License Management, and Clone Files

1.TROUBLESHOOTING FOR THE HARDWARE
32 Clearing a Paper Misfeed
 Envelope Drawer
1
Open the paper source drawer, and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for envelope is not exceeded when placing envelope in the Envelope
Drawer. The amount of envelope you can load in the drawer is lower than that for plain paper.
 Large Capacity Feeder
1
Open the drawer of the Large Capacity Feeder.
2
Pull out the right-hand tray and remove the misfed paper.