1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 33
TROUBLESHOOTING FOR THE HARDWARE
3
Check that there is no folded/curled paper or overloading, and then close the drawer of the Large
Capacity Feeder.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
Bypass tray
1
Move the green paper holding lever toward the outside.
The paper can now be removed.
2
Pull out the misfed paper in the bypass tray.
3
Place paper in the bypass tray again and then move the green paper holding lever toward the
inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.
To Next Page
Loading...
