1.TROUBLESHOOTING FOR THE HARDWARE
50 Clearing a Paper Misfeed
8
Remove the misfed paper.
If the paper is caught by the roller in the exit section, remove it by lifting the roller up with your fingers.
9
Close the cover of the Bridge Unit.
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to close the tray until it clicks.
Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by pressing the right side of the lever.
To Next Page
Loading...
