6.SETTING ITEMS
User Functions Menu Items 99
6 SETTING ITEMS
FAX
Menu Functions Settings Descriptions / Reference Pages
TERMINAL ID ID NAME - P.103 “Registering the Terminal ID”
FAX NUMBER -
INITIAL
SETUP
RESOLUTION STANDARD, FINE,
ULTRA FINE
Sets the resolution based on the fineness
of the original.
If the recipient’s fax machine is not
capable of receiving originals at the
same resolution, the resolution is
automatically converted before being
sent it to the recipient. The higher
the resolution is, the longer it takes
to send an original.
ORIGINAL
MODE
TEXT/PHOTO, TEXT,
PHOTO
Sets the scanning mode based on the
type of the original.
In the TEXT/PHOTO mode or
PHOTO mode, transmission time
may be longer than in the TEXT
mode.
EXPOSURE AUTO, MANUAL Sets the density at which the original is to
be scanned.
TTI ON, OFF Switch the TTI recording ON or OFF. To
enable this feature, the Terminal ID must
be registered to this equipment in
advance.
P.103 “Registering the Terminal ID”
Setting this item may not be required
since it may not be displayed on the
screen (it depends on your country
or region).
RTI ON, OFF Switch the RTI recording ON or OFF. To
enable this feature, the Terminal ID must
be registered to this equipment in
advance.
P.103 “Registering the Terminal ID”
To Next Page
Loading...
