2 SENDING A FAX
44 Checking and Canceling the Transmissions
4
Press or to select the row to confirm.
The transmission status is listed in the reverse chronological order from top to bottom.
5
Press to display the transmission status.
The status of each job is indicated as follows:
Canceling transmission when an original is being scanned
You can cancel transmission during the scanning of an original.
1
Press [CLEAR/STOP] while the original is being scanned.
2
Select [YES], and then press [OK].
The scanning process is aborted.
TRANSMISSION: Sending on the line.
REDIAL WAITING: Communication is in the redial standby queue.
WAITING: Communication is in the standby queue.
To Next Page
Loading...
