4.OTHER PRINTING METHODS
Printing From UNIX/Linux 151
OTHER PRINTING METHODS
Duplexing
The current duplex mode can be specified using the following options.
If this option is not specified, the default value “simplex” will be used.
It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately can override the
booklet mode setting for duplexing.
Example: The command to specify long edge duplexing is “lp -o duplex <filename>”.
Option Value Alternate Value Description
simplex Turn duplexing off.
duplex lduplex
duplex_long
duplex=long
hduplex
Turn duplexing on with long edge binding.
sduplex duplex_short
duplex=short
vduplex
Turn duplexing on with short edge binding.
To Next Page
Loading...
