Toshiba E-STUDIO2508A - Enlarging and Reducing

2.PRINTING FROM WINDOWS APPLICATIONS
26 Setting the Paper and Reproduction Ratio
 Enlarging and Reducing
You can automatically enlarge or reduce an image to fit a specified paper size. You can also set the scale manually.
 P.26 “Scale to fit paper size”
 P.26 “Specifying a scale”
 Scale to fit paper size
You can automatically enlarge or reduce an image to fit a specified paper size.
1
Display the [Basic] tab menu.
2
Select the document size in [Original Paper Size]. Select the paper size in [Print Paper Size].
The document image is automatically enlarged or reduced depending on the original paper size and print paper
size.
3
Set other printing functions as needed, and then click [OK].
4
Click [Print] or [OK] to send the job.
 Specifying a scale
Manually set the scale to enlarge or reduce the image.
1
Display the [Basic] tab menu.
2
Select [Image Scale], and then enter the scale.
You can set from 25% to 400% in units of 1%.
3
Set other printing functions as needed, and then click [OK].
4
Click [Print] or [OK] to send the job.