2.PRINTING FROM WINDOWS APPLICATIONS
50 Adding Print Content
Creating or editing a watermark
1
Click [Add] on the [Effect] tab. You can also select a watermark to edit, and then click [Edit].
2
Set the details in the [Watermark] dialog box.
Caption: Enter the text. You can enter up to 63 alphanumeric characters.
If too many characters are entered, the watermark may not be printed correctly.
Position: Select the icon and set the position.
Font Name: Select the font.
Style: Select the font style.
Font Size: Enter the font size. You can enter any integer between 6 and 300 pt in units of 1 pt.
Color: Select the color. If the color you want is not listed, click [Browse] to display the color palette and add your
color.
Only available when your equipment is a multifunctional digital color system (color MFP).
When [Black and White] is selected from [Color] on the [Basic] tab, [Color] is not available.
Angle: Enter the rotation degree of the angle. The angle can be set from -90 to 90 degrees in units of 1 degree. You
can also set this by moving the scroll bar.
Print Style: Select the print style.
Solid: Prints a solid watermark.
Draw as Outline: Prints an outline watermark.
Transparency: For transparent watermarks. Set the transparent ratio from 0 to 100% in units of 1%. You can
also set this by moving the scroll bar.
3
Click [OK] to save.
To Next Page
Loading...
