2 SETTING ITEMS (ADMIN)
100 Setting General Functions
Setting the option
This function allows you to select whether hole punching on sheets of tab paper is enabled.
This option is available only for the e-STUDIO856 Series with the Hole Punch Unit (optional) installed.
1
Press [GENERAL] in the Admin menu (1/2).
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
2
Press [OPTION].
The OPTION screen is displayed.
3
Press [ON] to enable hole punching on sheets of tab paper, and press [OK].
To Next Page
Loading...
