Toshiba E-studio2540c - Ipsec (IP Security) Setting

2.SETTING ITEMS (ADMIN)
Setting Network Functions 161
2 SETTING ITEMS (ADMIN)
 IPsec (IP security) setting
When the IPsec Enabler (optional) is adopted, the encrypted communication is enabled using the IPsec (IP Security
Protocol).
The following operations are available in this menu.
y Viewing the IPsec policy name currently applied
y Enabling / Disabling IPsec communication
y Flushing IPsec session
Settings required for IPsec such as entry of IPsec policies can be performed using TopAccess. For details, refer to the
TopAccess Guide “Chapter 8: [Administration] Tab Page”.
[IPsec] is available only when the IPsec Enabler (optional) is adopted.
1
Press [NETWORK] in the ADMIN menu (1/2).
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
 P.75 “Entering Admin Menu”
2
Press [IPsec].
The IP SECURITY screen is displayed.