2 SETTING ITEMS (ADMIN)
216 Resetting the equipment settings back to the factory defaults
2
Press [FACTORY DEFAULT].
The message asking you to initialize the equipment settings is displayed.
3
Press [OK].
The initialization begins.
y If you want to back up the setting data and user data before initialization, use the cloning function to make
duplicate files.
For details on the cloning function, see the following page:
P.117 “Creating or installing cloning files”
y When the initialization fails, the message “The process failed.” will be displayed. In this case, press
[CLOSE], and perform the operation again.
4
Press [OK] to reboot the equipment.
The equipment is now rebooted.
To Next Page
Loading...
