Toshiba E-studio2540c - Setting the Printer Driver

Chapter 1 PREPARATIONS
20
When the installation is completed, click [Finish].
77
Click [Exit] and then [Yes] to nish the installation.
88
For details of the Client Utilities CD-ROM, see the following
page.
& P.61 “Client Utilities CD-ROM“ in this manual
For details of the recommended installation, refer to the
following guide.
& Software Installation Guide (PDF): “Chapter 2:
RECOMMENDED INSTALLATION”
•
•
Setting the printer driver
Before using the printer driver, you must congure the options installed in the equipment.
Select [Devices and Printers] in the [Start] menu.
11
Select TOSHIBA Universal Printer, right-click and then click [Printer Properties].
22
The conguration data of the options can be obtained automatically by opening the
[Device Settings] tab menu.
33
Click [OK]. The setting is completed.
44