Toshiba E-studio2540c - Replacing Staple Cartridge

Chapter 3 MAINTENANCE / TROUBLESHOOTING
Replacing Staple Cartridge
When “Check staple cartridge” appears on the touch panel, replace the staple cartridge according to the following procedures.
40
1
Open the front cover of the Finisher.
2
Take o the staple cartridge.
3
Take the empty staple case out of the staple
cartridge.
4
Install a new staple case into the staple cartridge.
5
Install the staple cartridge.
6
Close the front cover of the Finisher.
Stapler Unit of Finisher (MJ-1101)