1.TROUBLESHOOTING FOR THE HARDWARE
10 When This Screen Is Displayed
The waste toner box is full. Replace
it following the guidance on the
touch panel.
P.37 “Replacing the Waste Toner
Box”
The equipment requires adjusting
by a service technician.
Contact your service representative
with the error code displayed on the
right side of the touch panel.
Never attempt to repair,
disassemble or modify the
equipment by yourself.
You could cause a fire or get an
electric shock.
Always contact your service
representative for maintenance or
repair of the internal parts of the
equipment.
Screen Description / Remedy
To Next Page
Loading...
