8 When This Screen Is Displayed
0.When This Screen Is Displayed
Various screens are displayed on the touch panel depending on the state of the equipment. This section describes
how to solve problems with screen examples.
Screen Description / Remedy
A message appears on the upper
part of the screen to notify users of a
problem, etc. For the major
examples, see the following pages.
P.11 “Messages Displayed on the
Touch Panel”
An incorrect paper size or “ ”
indicates an unsuccessful paper size
detection. In this case, check the
following items.
Check if the paper with an
unacceptable size is placed in the
drawer.
For details about the acceptable
paper size, refer to the
Specifications Guide.
Check if the paper with a
non-standard size is placed in the
drawer.
Press [Custom] to set the paper
size manually.
Check if there is too much space
between the paper and the side
and end guides of the drawer.
Set the paper, the side guide and
the end guide to the appropriate
position again.
If a different paper size is
displayed even though a standard
size paper has been placed, set
the paper size manually. To do so,
the change of the setting by the
administrator is required. For
details, refer to the MFP
Management Guide.
To Next Page
Loading...
