1.TROUBLESHOOTING FOR THE HARDWARE
44 Cleaning the Inside of the Equipment
8
Hold the cleaner with its pad side down.
Do not touch the pad at the top of the cleaner, because the toner on the pad may stick to your hands and the
cleaner pad may be stained.
9
Insert the cleaner through the service hole of the developer under the arrow to the end.
10
Pull the cleaner back out until the round hole appears. Repeat this 3 times for each of the 4
colors.
11
Attach the cleaner with its top on the right and its holding side on the left.
Check that the cleaner is fixed to the cover.
To Next Page
Loading...
