1.TROUBLESHOOTING FOR THE HARDWARE
18 Messages Displayed on the Touch Panel
Error Codes
The error codes indicating the status of the equipment may appear on the touch panel. For details, please refer to the
Software Troubleshooting Guide.
LAN cable is not detected The LAN cable connection is not
detected.
Check the following items.
Check that the LAN cable is connected to
the equipment.
Check that there is no damage on the
connector of the LAN cable.
Check that the LAN cable is open circuited.
Check that the LAN cable is connected to
the HUB. Check that there is no damage to
the connector.
Check that the power is ON for the HUB to
which the LAN cable is connected.
Check that the settings of the
communication speed and the Ethernet
method for the equipment and the HUB are
aligned.
Message Problem Description Corrective Action
To Next Page
Loading...
