Toshiba e-STUDIO3515AC - Page 18

18
No.
Inspection
Item
Option connect
status
Inspection
result
Correspondence
14
USB FAX
Two Fax boards
connected
OK?
[Fax2 detected]
Step 1. Check if connectors
CN101 and CN103 are
connected.
⇒ If not improve, go to Step 2.
Step 2.
Check and replace the related
harness.
⇒ If not improve, go to Step 3.
Step 3. Replace the Fax board.
⇒ If not improve, go to Step 4.
Step 4. Replace the SYS board.
OK? [No Fax
detected]
Since neither fax board could
be detected, check the above
two items.
A Fax board
connected
OK? [No Fax
detected]
Step 1. Check if connectors
CN101 and CN103 are
connected.
⇒ If not improve, go to Step 2.
Step 2. Check and replace the
related harness.
⇒ If not improve, go to Step 3.
Step 3. Replace the Fax board.
⇒ If not improve, go to Step 4
Step 4. Replace the SYS board.