2 Installing Client Software for Windows
126 Installing Client Software from TopAccess
Installing Client Software from TopAccess
If the system administrator has uploaded the driver software to this equipment, you can use
TopAccess to install the software on your workstation. The e-STUDIO452 Series and e-
STUDIO282 Series is used in the following images. They may be slightly different depending on
your system.
y When using Windows Server 2003 that the Service Pack is installed, the installation from
TopAccess cannot be performed. In that case, please install the software in the other
method.
y For instructions on how to upload the software in the equipment, please refer to the TopAc-
cess Guide.
Installing client software from TopAccess for Windows
1
In TopAccess, click the Install Software link at the bottom of the
screen.
y The Install Client Software page opens.
2
Click the “Install Client1” link to download the installer file.
3
Download the installer file on your desktop by following the
prompts.
To Next Page
Loading...
