5 SETUP FLOW
50 SETUP FLOW FOR PRINTING FEATURES
Setup Flow for IPP Printing
This equipment can be used with the IPP printer connection for Windows 2000, Windows XP,
Windows Vista, and Windows Server 2003 in a TCP/IP network. Even though IPP printing can
be used in the local area network, this method is commonly used to print over the Internet. If you
allow IPP printing through the Internet, you must configure the DNS server to enable users to
access this equipment over the Internet using the HTTP protocol.
This is useful when users want to print to this equipment from outside the local area network.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“2. CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Connecting over Internet
Setting up the IPP
printer connection
Ð
To Next Page
Loading...
