5 SETUP FLOW
70 SETUP FLOW FOR SCANNING FEATURES
Set up the IPv6 Assign the IP address, prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“3. SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv6)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Set up the FTP Network
Service
Enable the FTP Client using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the FTP Client”
Set up the Destination An administrator should configure the network folder will be enabled or dis-
abled for Scan to File destination using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Save as file Settings”
“Setting up the Destination”
Set up the Remote 1 and
Remote 2
If the network folder is enabled for the Scan to File destination, an adminis-
trator should specify the network folders to save the scanned file, or allows
users to specify the network folder using TopAccess.
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Save as file Settings”
“Setting up the Remote 1 and Remote 2”
Setup Flow Description/Reference
To Next Page
Loading...
