2.HOW TO MAKE COPIES
Bypass Copying 41
2 HOW TO MAKE COPIES
5
Press [PAPER TYPE] if the paper you placed on the bypass tray is other than plain
paper.
6
Press the button of the same paper type as the paper you placed on the bypass tray.
Then press [OK].
y If you select a wrong paper type, this could cause a paper jam or significant image trouble.
y When you select a paper type, you can confirm it with the icons displayed on the equipment status
indication area. For details, see the following page:
Table in step 6 in “Copying on A3, A4, B4 and B5 size paper (in equipment other than for North America) /
LD, LT, LG and ST-R size paper (in equipment for North America)”( P.3 7 )
7
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
